Home >

Mandatory Standards For GB24613-2009 Toy Coatings

2010/10/26 18:04:00 46

Toy Coatings Standard

Since October 1, 2010, the National Coatings and pigments

standard

Proposed by the technical committee

Toys

use

coating

The mandatory standard GB24613-2009 "limits on harmful substances in toy coatings" will come into effect in October 1, 2010.

This mandatory standard applies to all kinds of toys coatings, and stipulates the requirements for the limits, testing methods and packaging labels of harmful substances in toy coatings.

Suppliers who provide coatings for toy manufacturers should ensure that their products meet the requirements of the national standard.



    
        
            
            

Hazardous substance


            
            
            

Limit


            
        
        
            
            

total lead


            
            
            

Less than 600mg/kg


            
        

        
            
            

Soluble elements


            
            
            

Antimony (Sb)


            
            
            

Less than 60mg/kg


            
        

        
            
            

Arsenic (As)


            
            
            

Less than 25mg/kg


            
        

        
            
            

Barium (Ba)


            
            
            

Less than 1000mg/kg


            
        

        
            
            

Cadmium (Cd)


            
            
            

Less than 75mg/kg


            
        

        
            
            

Chromium (Cr)


            
            
            

Less than 60mg/kg


            
        

        
            
            

Lead (Pb)


            
            
            

Less than 90mg/kg


            
        

        
            
            

Mercury (Hg)


            
            
            

Less than 60mg/kg


            
        

        
            
            

Selenium (Se)


            
            
            

Less than 500mg/kg


            
        

        
            
            

O-phthalate two


            
            
            

O-phenyl two formic acid two -2- ethylhexyl ester (DEHP)


            
            
            

Less than 0.1%


            
        

        
            
            

Dibutyl phthalate (DBP)


            
        

        
            
            

Butyl benzyl ortho two benzoate (BBP)


            
        

        
            
            

Two ISO nonyl ester of ortho two carboxylic acid (DINP)


            
            
            

Less than 0.1%


            
        

        
            
            

Two isodecyl ortho two carboxylate (DIDP)


            
        

        
            
            

Two octyl phthalate two (DNOP)


            
        

        
            
            

Volatile organic compound content


            
            
            

Less than 720g/L


            
        

        
            
            

The sum of toluene, ethylbenzene and xylene


            
            
            

Less than 30%


            
        

        
            
            

benzene


            
            
            

Less than 0.3%


            
        

    


Remarks: it is only applicable to solvent based paints, and is tested according to the mixture ratio of the products.

If diluent is used in a certain range, it should be tested according to the recommended maximum dilution ratio.


In the normal production process, at least once a year, for finished products and coatings.

The following situations should also be tested:


Product design / production address / formulation / process / main raw material / ingredient ratio, update or change;


Production is resumed 3 months after the shutdown.


Regarding product label requirements, coating packaging must conform to the GB/T9750 standard, and the relevant labels need to be clearly shown on the package.

For two-component coatings or multi component coatings, the production formula must be marked in product packaging and user manuals.

The dilution ratio should be marked in the coating, packaging or user manual for the production process.

  • Related reading

Fujian Garment Textile Standardization Technical Committee Was Formally Established.

Industry standard
|
2010/10/26 17:05:00
53

Analysis Of Banned Azo Dyes In Textiles In China

Industry standard
|
2010/10/25 17:11:00
48

GB24613-2009 Mandatory Standard For Toy Coatings Will Take Effect From October 1St.

Industry standard
|
2010/10/22 15:32:00
34

Discussion On The Standard Name Of Clothing

Industry standard
|
2010/10/21 14:54:00
48

Brief Introduction Of "Test Method For Dry Heat Dimensional Change Of Hot Melt Adhesive Lining"

Industry standard
|
2010/10/19 16:50:00
52
Read the next article

What Is The Customs Tariff?

The customs tariff, also known as customs tariff and tariff rate table, refers to the classification and tariff rates and customs rates set and promulgated by a country in respect of goods entering and leaving its customs boundary. The detailed title, tax rate, tax standard (ad valorem or amount), tax unit, etc. of the taxable or duty-free goods are included in the table. The classification of commodities in tax regulations is divided according to the degree of commodity processing, some are cla